craigslist | tools in burnaby/newwest

Crank shaft grinder grindix1000e (newwest bc) $12500

2012-02-10T03:22:03-08:00

Grindiex model 1000e crank shaft grinder use 24inch stone, come with all accessery tools, is invery good working condition 220volt 3 phase call Rick 604 809 9722

Location: newwest bc
it's NOT ok to contact this poster with services or other commercial interests

Commercial vacuum ( burnaby) $440

2012-02-10T02:47:42-08:00

commercial vacume nss pacer 30 large wide vacum in agood condition include 6 new bags
new is over 2500$ this one is use 440$
NSS Pacer 30" Wide Area Vacuum Cleaner
Compatible With31,000 sq. feet per hour the 27 Sidewinder is great for parking lots and large open areas where hand sweeping is required. Schools, Churhes, YMCA's are great for using this sweeper.

if intrested ph 778 8399643 our email

commercial vacume

Location: burnaby
it's NOT ok to contact this poster with services or other commercial interests

TPI DIGITAL MULTIMETER (Burnaby) $75

2012-02-10T00:55:39-08:00

TPI DIGITAL MULTIMETER
Model Number TPI 133
Manual ranging full size Digital Multi Meter
Large easy to read display
Display Count 2000
AC Volts 750
DC Volts 1000
Basic DC Accuracy 0.5 percent
AC Amps 10
DC Amps 10
Data Hold Yes
Rubber Boot included
7 3/4 x 3 3/4 x 2 1/4
Standard test leads included
Instruction manual included
Selling for $75 cash

Location: Burnaby
it's NOT ok to contact this poster with services or other commercial interests

Two cycle generator never used (Burnaby) $90

2012-02-10T00:15:47-08:00

New still in box.

Location: Burnaby
it's NOT ok to contact this poster with services or other commercial interests

Vibrating/shaking tables (Burnaby)

2012-02-10T00:09:36-08:00

An older one with variable speed and a newer one with single speed. Both are approx 1.5 square ft top and about 10 inch high.
One for $50 or both for $75

Location: Burnaby
it's NOT ok to contact this poster with services or other commercial interests

Metal bar with rollers (byrne and marine)

2012-02-10T00:03:31-08:00

8 ft long each with rollers. Approx 60 to 70 of these. $20 for 10. or $1. each for all.

Location: byrne and marine
it's NOT ok to contact this poster with services or other commercial interests

Delta truck box (vancouver/burnaby) $250

2012-02-09T23:55:22-08:00

Selling my Delta Truck box for I got a Tonneau Cover and won't be needing this anymore

Its in very good condition like new

Selling for $250 obo

Location: vancouver/burnaby
it's NOT ok to contact this poster with services or other commercial interests

1 1/4 "long X 1/4" wide Plastic fasteners with metal hammer/screw ste $25

2012-02-09T20:05:56-08:00

1 1/4 "long X 1/4" wide
Plastic fasteners with metal hammer/screw stems =4-ucan 100pins &1 hilti 100 pins in a box =$25. each
all metal fasteners with metal hammer stems = bag of 250 for $60.

also 4 hilti bits 6"long X 3/16" & 1 bosch 4"long X 1/4"
all 5 for $25

email me back = craigslistsell42@yahoo.ca
thanks

it's NOT ok to contact this poster with services or other commercial interests

safety hat hardhat $15

2012-02-09T19:56:02-08:00

red hard hat with adjustable head strap

15 bucks

778 320 4266

it's NOT ok to contact this poster with services or other commercial interests

ROPE all lengths..Vertical lifeline - 3-strand FALL Arrest ( Canadian approved !) $50

2012-02-09T19:50:55-08:00

1 - 50' =
1- 75' = $50
2-100' =
1-125' = $80
Vertical / Horizontal lifeline - 16mm (5/8") 3-strand
FALL Arrest / Restraint , Canadian approved !

my email = craigslistsell42@yahoo.ca

Location: Canadian approved !
it's NOT ok to contact this poster with services or other commercial interests

Drywall stilts (New Westminster) $110

2012-02-09T19:48:42-08:00

One pair of Dura Stilts brand drywall stilts. New they cost about $300. They are in very good condition and ready to use. I am not a drywaller and I just dont use them enough to justify keeping them.
If you email me with a phone number I will call you right back asap. thanks

Location: New Westminster
it's NOT ok to contact this poster with services or other commercial interests

2 5lb weights (New Westminster) $5

2012-02-09T19:46:33-08:00

2 5lb cast iron weights

Location: New Westminster
it's NOT ok to contact this poster with services or other commercial interests

IMER Combi 250V bridge tile saw (BBY) $850

2012-02-09T19:14:11-08:00

Very good saw , head tilts to miter tile edges, comes with stand and good 10 inch blade

Location: BBY
it's NOT ok to contact this poster with services or other commercial interests

otc scanner (south burnaby) $100

2012-02-09T19:03:03-08:00

otc scanner - does up to '85

Location: south burnaby
it's NOT ok to contact this poster with services or other commercial interests

hoist (south burnaby) $6000

2012-02-09T19:02:48-08:00

14,000lb 4 post hoist with 2 6000lb bridge jacks. brand new in the crate, no pictures available
(because it's still in original crate)

Location: south burnaby
it's NOT ok to contact this poster with services or other commercial interests

hoist pad extenders (south burnaby) $20

2012-02-09T19:02:36-08:00

hoist pad extenders-brand new $20 each 24 of flat type & 24 of type with edges
gives 6" more lift

Location: south burnaby
it's NOT ok to contact this poster with services or other commercial interests

Bernzomatic Solid Brass Torch Kit (New Westminster) $2

2012-02-09T19:01:53-08:00

Bernzomatic Solid Brass Torch Kit
cylinder is not even half full
call 778-712-7171

Location: New Westminster
it's NOT ok to contact this poster with services or other commercial interests

snap-on scanner (south burnaby) $1000

2012-02-09T19:01:47-08:00

snap-on mt 2500 scanner, current to 2001 includes aftermarket handheld OBD reader

Location: south burnaby
it's NOT ok to contact this poster with services or other commercial interests

sissor dump lift (south burnaby) $650

2012-02-09T19:00:21-08:00

nordic sissor dump lift modle #TL1622 Ref # 242
for 5 ton truck power tail-gate

Location: south burnaby
it's NOT ok to contact this poster with services or other commercial interests

pressure washer (south burnaby) $300

2012-02-09T18:59:59-08:00

pressure washer...runs on kerosen and 110v ...working pressure 1000 psi, max 2150 psi...305F @ 2.5 gal/min

model Wap DX802, 1994 cover slightly broken...$300 obo

Location: south burnaby
it's NOT ok to contact this poster with services or other commercial interests

Makita 18v Grinder NEW tool only (New West) $80

2012-02-09T18:38:39-08:00

New Makita 18volt cordless grinder 4 1/2" Model BGA452 ,comes with two different guides and removal tool . 604 715 9885

Location: New West
it's NOT ok to contact this poster with services or other commercial interests

HITACHI C12LSH CHOP SAW $380

2012-02-09T18:36:10-08:00

Nice big chop saw digital and lazer

it's ok to contact this poster with services or other commercial interests

10 NEW Stainless Steel Braided Leader Hose for COMPRESSOR w/valve (New Westminster) $50

2012-02-09T18:22:44-08:00

NEW 10 PIECES
Stainless Steel Braided Leader Hose by VIAIR - p/n 92791
3/8" M x 3/8" M x 2FT
with inline check valve

Leader hoses allow hot air from compressors to cool while being delivered to a tire or air tank.
Hoses with check valves help to protect the head of the compressor from damaging high pressure starting.

Location: New Westminster
it's NOT ok to contact this poster with services or other commercial interests

2 bar clamp (New Westminster) $20

2012-02-09T18:13:18-08:00

2 QUICK-GRIP bar clamp,
24"
Like new
Heavy duty

Location: New Westminster
it's NOT ok to contact this poster with services or other commercial interests

Portable Wet / dry Diamond Tile saw NEW $60

2012-02-09T16:23:00-08:00

New Tile saw , perfect for free hand cuts, circle cuts, or any other cut that is not suitable or a regular tile saw

New with 4 1/2 inch smooth cut wet / dry diamond tile blade

it's NOT ok to contact this poster with services or other commercial interests

Snap-on Electric power washer 1750 psi $95

2012-02-09T16:22:54-08:00

Snap on ...power washer 1750 psi electric power washer, dont need it anymore , down sizing

Has Built in soap mixer dispenser too which is really handy

Priced to sell

it's NOT ok to contact this poster with services or other commercial interests

Brand NEW Rail Tile saw, cuts up to 26 inch tiles $275

2012-02-09T16:22:44-08:00

Brand new never used , top of the line tile cutting machine, Rail saw's are considered the best ...so here is your chance to save on a brand new saw that you would normally pay $500 to $600 plus tax for
Has Built in water tray, legs/stand, water pump of course.
Also multi angle cutting for 45 degee edge cuts etc.

Call 778 867 7769

it's NOT ok to contact this poster with services or other commercial interests

4"-8" FILES "New" FLAT, SQUARE, THREE-SIDED *IDEAL for Jewelry, etc. (Burnaby) $1

2012-02-09T15:54:51-08:00

4"-8" *FILES* "New" FLAT, SQUARE, THREE-SIDED *IDEAL for Jewelery, etc.

********BRAND NEW********
MADE IN: ENGLAND
** "NOT" MADE IN CHINA! **
***************************

4" FLAT - "Bastard-Cut" (Warding) - (27) available **********(4" FILES - TOP-LEFT PICTURE)
4" SQUARE - "Bastard-Cut" - (74) available
4" THREE-SIDED - "Second-Cut" (Taper Saw) - (7) available

6" SQUARE - "Smooth-Cut" - (80) available ****************(6" FILES - TOP-RIGHT PICTURE)
6" THREE-SIDED - "Second-Cut" (Cant Saw) - (12) available
6" THREE-SIDED - "Second-Cut" (Taper Saw) - (70) available

8" SQUARE - "Bastard-Cut" - (6) available ****************(8" FILES - BOTTOM-RIGHT PICTURE)
8" THREE-SIDED - "Second-Cut" (Taper Saw/Dbl Ex Slim) - (60) available

********BRAND NEW********

ASKING: $.50 each (2) for $1.00

CALL: KEVIN @ (604) 290-4082

Location: Burnaby
it's NOT ok to contact this poster with services or other commercial interests

10" FILES "New" SQUARE, THREE-SIDED - Made in ENGLAND, etc. (N. Burnaby) $1

2012-02-09T15:54:30-08:00

10" **FILES** "New" - SQUARE, THREE-SIDED - Made in ENGLAND, etc.

**********BRAND NEW**********
MADE in: ENGLAND, INDIA, etc.
** "NOT" MADE IN CHINA! **
*******************************

10" SQUARE - "Smooth-Cut" - (80) available - MADE IN ENGLAND - (TOP PICTURE)
10" SQUARE - "Bastard" - (56) available - MADE IN ENGLAND

10" THREE-SIDED - "Bastard" - (20) available - MADE IN INDIA
10" THREE-SIDED - "Second-Cut" - (40) available - MADE IN ENGLAND
10" THREE-SIDED - "Smooth-Cut" - (11) available - MADE IN INDIA

**********BRAND NEW**********
COST: $8.00 - $12.00 each "NEW" in TOOL STORES!

ASKING: $1.00 EACH

CALL: KEVIN @ (604) 290-4082

Location: N. Burnaby
it's NOT ok to contact this poster with services or other commercial interests

HITACHI * NV65AH * 2-1/2" HARDI SIDING COILNAILER (4-months old) (BBy) $195

2012-02-09T15:52:22-08:00

HITACHI * NV65AH * 2-1/2" HARDI SIDING COIL NAILER (4-months old)

*IDEAL* for HARDI or CEDAR SIDING, etc.

-drives 15 degree wire & plastic collated coil nails: 1-1/2" - 2-1/2" (.090-.099)
-lightweight - 4.6 lbs
-tool-less depth-of-drive adjustment to countersink or flush drive coil nails
-no-mar pad
-bottom-load magezine
-360 degree adjustable exhaust
-plastic nail guard
-comfort rubber grip
-tool in excellent working condition - (4-months old)
COSTS: $500.00+ NEW

ASKING: $195.00

CALL: KEVIN @ (604) 290-4082

Location: BBy
it's NOT ok to contact this poster with services or other commercial interests

Cadillac Tool Belt and Tools (edmonds highgate) $40

2012-02-09T15:27:14-08:00

Cadillac tool belt with tools
framing hammer,pry bar, stanley tin snips, screw drivers, chisel, punches,chalk line, skill saw with good extension cords, vests, hard hats, steel toed rubber boots in good condition size 10. great starter for some one new to the constuction trade!!! i have photos but cant seem to publish but can email!
richard at (778) 398-3650

Location: edmonds highgate
it's NOT ok to contact this poster with services or other commercial interests

HEAVY DUTY FLAT DOLLIES (South Burnaby)

2012-02-09T15:24:29-08:00

Heavy duty flat dollies and barrel carts
1000 lb capacity and up
604 441 4183 JOHNNY

Location: South Burnaby
it's NOT ok to contact this poster with services or other commercial interests

Snap-On Rolling Cabinet (New West) $2000

2012-02-09T15:15:19-08:00

Excellent condition - glossy black Snap-On Rolling Cabinet model KRA4107DPC......hardly used

Location: New West
it's NOT ok to contact this poster with services or other commercial interests

Craftsman 22 Litre wet/dry VAC (New Westminster) $50

2012-02-09T15:08:27-08:00

Craftsman 22 Litre wet/dry VAC,
Come with dusting brush, floor brush, car nozzle, crevice tool, regular nozzle totally five, two extension wand, owner's manual,
Never commercially use
Very good condition and clean.
Made in USA

Call Derek at 778-712-7171

Location: New Westminster
it's NOT ok to contact this poster with services or other commercial interests

Milwaukee Cordless Drill (New Westminster) $80

2012-02-09T15:07:13-08:00

Milwaukee Heavy Duty 14.4V 1/2" Cordless Drill, German Made, Come with two batteries, charger, and manual. Asking for $80, Including: a set of screw bit, drill hood, 2 bit extention. Please call 778-712-7171

Location: New Westminster
it's NOT ok to contact this poster with services or other commercial interests

Hand Truck by Harper (New Westminster) $30

2012-02-09T15:06:35-08:00

The Super Steel � 600 Hand Truck by Harper provides 25% greater performance over the competition The "P" Handle design provides for easy 1 or 2 hand control by the operator.
� 600 lb Capacity
� 10" Heavy Duty Pneumamatic All-Terain Tire
� Harper Powder Coat Green
made in usa
778-712-7171

Location: New Westminster
it's NOT ok to contact this poster with services or other commercial interests

Craftsman 8 1/2" sliding compound mitre saw (New Westminster) $150

2012-02-09T15:05:55-08:00

Craftsman 8 1/2" sliding compound mitre saw, like new, very good condition. 2HP( max. developed; 5000R.P.M. come with owner's Manual
778-712-7171

Location: New Westminster
it's NOT ok to contact this poster with services or other commercial interests

Bishamon model x305 Automated Hydraulic Scissor Table Lift (Near SFU) $900

2012-02-09T14:14:55-08:00

New lift table purchased for business but never used. Has sat in storage past two years. Lift tables are used to raise and position materials for a worker in such a way as to reduce potential injuries in a wide array of industries.

Table is 40"X 20 1/2" lifts to a height of 54 1/2" has a capacity of 300 Kg (660 Lbs). Motor is single phase, voltage 115, 1/2 HP. Up and down controller, raises load in seconds.

Serious inquiries email for viewing information.

Location: Near SFU
it's NOT ok to contact this poster with services or other commercial interests

MODUBLAST BEAD BLASTING CABINET $500

2012-02-09T14:13:50-08:00

GREAT CABINET FOR GENERAL USE. COMES WITH GLASS BEADS AND WALNUT SHELLS. WORKS GREAT

it's NOT ok to contact this poster with services or other commercial interests

brand new outdoor extension cord 12 feet long (New Westminster) $6

2012-02-09T14:10:22-08:00

Pick up only pls

Location: New Westminster
it's NOT ok to contact this poster with services or other commercial interests

SZ335 tire chains $55

2012-02-09T14:00:44-08:00

SZ335 fits these tires: 225/70-14, 215/65-15, 215/70-15, 225/60-15, 235/55-15, 215/60-16, 215/65-16, 225/55-16, 245/55-16.

used once last year, too big for my current vehicle

778 867 7769

it's NOT ok to contact this poster with services or other commercial interests

Craftsman table saw (bby) $100

2012-02-09T13:45:24-08:00

older crafstman table saw. could be cleaned up. 10" . Model lr16012
Works great. I don't use it.

Location: bby
it's NOT ok to contact this poster with services or other commercial interests

FatMax Mobile Work Center - half price (N. Bby - Can deliver) $65

2012-02-09T13:09:48-08:00

This table helped me through a couple of projects and shows some wear...

..a broken handle;
...a small cut or two on the table top;
....a crack in the bracket holding the power outlet;

And these minor issues are reflected in the price.

Still, nothing to stop this from being a great, fully functioning table that works very well and has a built-in dolly, too.

No dickering - I've seen these on-line for $135 - $200 + tax.

If this unit interests you at this price, just give me a ring.

Local delivery is available for a few dollars more, ($20-40) depending on where you're located.

Call Eric from 8AM to 7PM ONLY!

And please, be ready to set an appointment for same or next day viewing.

Thanks,

(6 O 4) 8 6 8 - O 2 1 9

Location: N. Bby - Can deliver
it's NOT ok to contact this poster with services or other commercial interests

Pneutek Fasteners 3/4 inch 1000 per box (South Burnaby) $5

2012-02-09T13:03:15-08:00

I have ten boxes of 3/4 inch pneutek fasteners. Box says "air/safe fastening by pneutek". 1000 nails per box.

$5.00 a box firm.

Austin
778-386-4612

Location: South Burnaby
it's NOT ok to contact this poster with services or other commercial interests

HILTI TE 805 BREAKER HAMMER (Metrotown) $950

2012-02-09T13:00:05-08:00

HILTI TE 805 BREAKER HAMMER with 2 bits

A 115V Demolition Hammer used for concrete, masonry, or stone breaking.

In a good working condition. Comes with a box and bits.

Call for more info at 604-451-5626

4939 Kingsway Mon-Sat 10-6pm

Ask Alex for discount

Thanks

Location: Metrotown
it's NOT ok to contact this poster with services or other commercial interests

Grinder Stand (Bby/New West) $45

2012-02-09T12:59:49-08:00

Grinder Stand
Heavy Duty

The item is still for sale if you see this ad. I will remove it when sold.

Location: Bby/New West
it's NOT ok to contact this poster with services or other commercial interests

LATHE INSERT (COQ.) $30

2012-02-09T12:20:00-08:00

LATHE & MILLING INSERT $30 PER BOX (10 PCS.). CALL 778 991-6967

1 BOX OF TPMR 2.2521 MILLING INSERT

1 BOX OF TPG 432 MILLING INSERT

1 BOX OF SEKP 1204

1 BOX OF NG4156L PARTING & GROOVING INSERT

Location: COQ.
it's NOT ok to contact this poster with services or other commercial interests

LATHE BACKING PLATE (COQ.) $125

2012-02-09T12:08:12-08:00

NEW 9" D 1-6 CAM-LOCK BACKING PLATE. $125. CALL 778 991-6967

Location: COQ.
it's NOT ok to contact this poster with services or other commercial interests

MILLING MACHINE (PRO VISE STOP) (COQ.) $65

2012-02-09T12:08:07-08:00

Pro vise Stop single side

The Pro Stop by Edge Technology is the world's first vise stop with the CNC machinist in mind. Its super low profile design stays completely below the top surface of the vise which means that you do not need to worry about it interfering with the cutting tool paths. Whether you are making 10 parts or 10,000 parts the ultra rigid Pro Stop will not move once you lock it down. It is an ideal datum surface to locate your parts. The Pro Stop is extremely versatile allowing you to quickly position the hardened steel contact rod in any location you need it. If you need a vise stop that adjusts to your every need, then you need the Pro Stop!

The Pro Stop is CNC machined to exacting tolerances from 6061-T6 aluminum. The components is hard red anodized to resist wear and provide years of service

$65.00 CALL 778 991-6967

Location: COQ.
it's NOT ok to contact this poster with services or other commercial interests

MILLING VISE 6" (VERTEX) (COQ.) $250

2012-02-09T12:08:03-08:00

HEAVY DUTY 6" VERTEX MILLING VISE. ROTATION OF 360 DEGREES, JAWS ARE 8" WIDE, AND OPEN TO 6". $250. CALL 778 991-6967

Location: COQ.
it's NOT ok to contact this poster with services or other commercial interests

LATHE ( RADIUS CUTTER) (COQ.) $300

2012-02-09T12:07:54-08:00

LATHE RADIUS CUTTER. TAKES STANDARD 1/4" SQ. SHANK, GREAT TOOL IF YOU WANT TO MAKE YOUR OWN DIES. WILL CUT DIES UP TO 13" DIAMETER

ASKING $300 CALL 778 991-6967

Location: COQ.
it's NOT ok to contact this poster with services or other commercial interests

RADIUS TOOL FOR LATHE (COQ.) $250

2012-02-09T12:07:46-08:00

RADIUS TOOL FOR LATHE. TAKES 1/4" SQ SHANK, GREAT IF YOU WANT TO MAKE ROUND DIES UP TO 6 1/2" RADIUS. CENTRE OF CUTTER FROM 6 1/2" TO 7 1/2" WORKS ON LATHE WITH 13" UP TO 15", SELLING FOR $250. CALL 778 991-6967

Location: COQ.
it's NOT ok to contact this poster with services or other commercial interests

carpenters apron (Burnaby) $15

2012-02-09T12:07:03-08:00

Heavy leather. Ajustable quick release belt. (604) 524- 4346. 143

Location: Burnaby
it's NOT ok to contact this poster with services or other commercial interests

Drywall tools (Burnaby) $20

2012-02-09T12:04:04-08:00

Pole sander for drywall$20.00 also have a paddle trowel $15.00 (604) 524-4346

Location: Burnaby
it's NOT ok to contact this poster with services or other commercial interests

Kreg mitre saw fence system (New West) $90

2012-02-09T11:51:13-08:00

kreg precision measuring systems kit. New condition, never used, still in box.
$90.00 or best offer. $129.00 plus tax retail.

Location: New West
it's NOT ok to contact this poster with services or other commercial interests

Stanley HD Electric Planer (Lougheed Mall) $100

2012-02-09T11:06:30-08:00

Electric Planer, Really Heavy Duty look and feel. Has an adjustable fence and comes with three (3) additional inter-changable blades. No name on planer but extra blades are embossed with "STANLEY". $100.00 OBO

Location: Lougheed Mall
it's NOT ok to contact this poster with services or other commercial interests

7" rok tile saw w/laser and stand (burnaby) $60

2012-02-09T10:18:12-08:00

7" rok sliding tile saw with laser and stand
paid 260.00 at dicks last year
call me @ 6045127663

Location: burnaby
it's NOT ok to contact this poster with services or other commercial interests

10,000 Watts Max/7200 Watts Rated Belt-Driven Generator Head $300

2012-02-09T09:35:23-08:00

10,000 Watts Max/7200 Watts Rated Belt-Driven Generator Head

Build your own belt-driven brushless generator with our Belt-Driven Generator Head

Two 20-amp, 120-volt receptacles
One 30-amp, 120/240-volt twist-lock receptacle
Minimum gas or diesel engine configuration is 16 HP for maximum performance
Circuit-breaker protected
3600 RPM
Keyway: 1/4" x 2" L
Drive shaft: 1'' diameter x 2-3/8" long

Please Call 604 418 5554

it's NOT ok to contact this poster with services or other commercial interests

NEW makita hammer drill & impact drill combo (N.Burnaby) $325

2012-02-09T07:59:12-08:00

I'm selling my Makita tools. I bought them with very grand intentions but now we are expecting and I doubt I will have any time to work around the house.
I've literally used the impact drill once to build our baby's crib. And I used the hammer drill to drill 2 holes on the wall to secure a dresser.
It is similar to this selling at home depot.

http://www.homedepot.ca/product/18v-2-piece-cordless-combo-kit/950767

But mine does not have the handle on the hammer drill.
At home depot it would cost you $390.88 after tax.
Buy mine for only 325 obo.

Location: N.Burnaby
it's NOT ok to contact this poster with services or other commercial interests

ARROW FASTENERS #T50 Staple Gun/Tacker$25 (BURNABY)

2012-02-09T07:15:26-08:00

BRAND NEW ARROW FASTENERS #T50 T50 Staple Gun/Tacker$25

CALL 604-299-8868

Location: BURNABY
it's NOT ok to contact this poster with services or other commercial interests

NEWWWW STEEL TOE SHOE(KODIAK),BLACK,LEATHER,SIZE 10-WAS $200 (BBY) $55

2012-02-09T06:41:41-08:00

KODIAK STEEL TOE SHOE,BRAND NEW
SIZE 10 EE -BLACK WITH ALL CRTFD LOGO....

PIC TO GIVE YOU AN IDEA NOT EXCT.PIC BUT VERY CLOSE LOOK

------------------------------------------------------------------------
KEY WORD;tools,shoe,safty,boots,kodiac,construction,steel toe,safty boots,mechanic,auto parts,renovation,job,

Location: BBY
it's NOT ok to contact this poster with services or other commercial interests

RAMSET NAIL GUN (2 UNIT) + LOTS OF NAILS/CARTRGE/ EXTRAS (BBY BRENT WOOD) $95

2012-02-09T06:41:06-08:00

2 GUN- ONE IS VERY OLD :> BUT STILL WORKING ONE IS THE ONE IN PIC

LOTS OF NAILS / ***DIFFERENT SIZES*** WORTH WAY MORE THAN ASKING PRICE --

PICTURE SHOWS THE SAMPLE ----THERE IS OVER 10 BOX OF NAIL +OVER 100 CARTRIDGES RED/ YELOOW
$300 value

ITS GOOD FOR SMALL JOB NOT TO RENT ONE/ BUY NAILS BACK AND FORTH TO STORE

DONOT KNOW DETAILS, I JUST USED IT FOR MY CABINET FOR FIRST ITME- ONE DAY

PLEASE IGNORE THIS ADD IF YOU NEED more info- offers....

604 339-5633

Location: BBY BRENT WOOD
it's NOT ok to contact this poster with services or other commercial interests

Brand new 6.5hp 2 stage snow thrower blower recoil and electric start (West Vancouver) $200

2012-02-09T04:44:26-08:00

Brand New IN BOX.

Last chance. Buy it now. Keep for next year. Save huge money.
original price 699. Now is 200. over 70% off.
Be Quick Only a Few left!!!!
Brand New Commercail Grade Snow Thrower.
Engine Power: 6.54Hp/4.8kw
Start Mode: Electric Start
Battery: 12V
Lamp: with Lamp
Working Width: 56cm
Working Thickness: 51cm
Weight: 75kg
Oil Type unleaded oil
Fuel Tank Capacity: 3.6L
Gad Needed Per hour: 0.8L/h
Type of transmission: Friction disc
Number of gears: 5 forward/2 revese speed
Thurable chute: manually horizontal and vertical
chute 1 rotating angle: 190 degree
chute 2 rotating angel: 70 Degree
Certification EPA/GS

CALL 604-818-1186 for Pick up
Pick up west vancouver park royal.

Location: West Vancouver
it's NOT ok to contact this poster with services or other commercial interests

NSS PACER 30 commercial vacume (burnaby) $440

2012-02-09T04:20:54-08:00

commercial vacume nss pacer 30 large wide vacum in agood condition include 6 new bags
new is over 2000 dollar ph 778-839-9643

440 dollar

Location: burnaby
it's NOT ok to contact this poster with services or other commercial interests

Commercial vacuum (burnaby) $440

2012-02-09T01:36:19-08:00

commercial vacume nss pacer 30 large wide vacum in agood condition include 6 new bags
new is over 2500$ call 778-839-9643 our email

NSS Pacer 30" Wide Area Vacuum Cleaner
Compatible With31,000 sq. feet per hour the 27 Sidewinder is great for parking lots and large open areas where hand sweeping is required. Schools, Churhes, YMCA's are great for using this sweeper.

Location: burnaby
it's NOT ok to contact this poster with services or other commercial interests

HEAVY DUTY TARP BAGS (COQUITLAM) $450

2012-02-08T22:56:21-08:00

20 PLUS FEET LENGTH 8FEET WIDE 8FEET HIGH OVER SEA SHIPPING TARP BAGS (BLUE) BRAND NEW GREAT 4 OUTSIDE STORAGE, LUMBER ,STEEL, BOATS/CARS, ETC...NO EMAIL 778-899-4210 A TARP BAG HAS 4 SIDES AND A TOP ONE PIECE WITH TIE DOWN HOLES ON BOTTOM 4 TIE DOWN ALSO AVAILABLE NEW AND USED TARPS VARIOUS SIZES AND PRICES STARTING@$250.00 AND UP

Location: COQUITLAM
it's NOT ok to contact this poster with services or other commercial interests

6.5 lawn mower (bby)

2012-02-08T21:26:52-08:00

6.5hp sears lawn mower used for year still new shape
asking 180.00 or offers
call tony 604 802 2687

Location: bby
it's NOT ok to contact this poster with services or other commercial interests

Pressure washer Simoniz 1500psi (Burnaby) $58

2012-02-08T19:37:34-08:00

in good working order

Location: Burnaby
it's NOT ok to contact this poster with services or other commercial interests

DIGITAL COUNTING SCALE (BURNABY) $130

2012-02-08T19:18:00-08:00

TEC digital counting scale SK-1105L. 5lbs x 0.001ibs. Great condition.

Location: BURNABY
it's NOT ok to contact this poster with services or other commercial interests

DeWalt 20V Max 1.5 AH Lithium-lon Battery (burnaby) $50

2012-02-08T19:01:12-08:00

2 new still in there package 20V Max 1.5 AH Lithium-lon Batteries. 50 each.

Location: burnaby
it's NOT ok to contact this poster with services or other commercial interests

dewalt 12volt lithum batteries (burnaby) $25

2012-02-08T19:00:50-08:00

i have 4 12volt lithium batteries for 25 each and a charger for 20
this is there new slide in style batteries.

Location: burnaby
it's NOT ok to contact this poster with services or other commercial interests

Air compressor (New West Moody Park) $120

2012-02-08T18:43:29-08:00

Quincy. Two-stage compressor. Rick 604 760 5982

Location: New West Moody Park
it's NOT ok to contact this poster with services or other commercial interests

24' extension ladder "Lite" (highgate) $100

2012-02-08T18:32:45-08:00

FS. 24' ALUMINIUM EXTENSION LADDER BRAND IS "LITE" WITH LEVELING STAND AND WILL THROW IN SOME LADDER STAND OFF
IN GOOD CONDITION AND IS GRADED 250LBS
LADDER NEW IS ALMOST 300$
LEVELING STAND SELLS FOR 100$
AND THE STAND OFFS ARE BRAD NEW AND SELL FOR 20$

GREAT DEAL!!!!!!
CALL OR TEXT DAVID
778 772 5758 OR EMAL

Location: highgate
it's NOT ok to contact this poster with services or other commercial interests

Very expensive air and water tight cargo box $50

2012-02-08T18:11:02-08:00

Sacrificing this military cargo shipping box, dimensions 22 1/2 inches deep x 26 inches high by 22 inches high....
very good condition.....air and water tight

it's NOT ok to contact this poster with services or other commercial interests

Makita 18v Grinder NEW tool only (New West) $80

2012-02-08T17:03:29-08:00

New Makita 18volt cordless grinder 4 1/2" Model BGA452 $80.00 please call 604 715 9885 Thanks

Location: New West
it's NOT ok to contact this poster with services or other commercial interests

Dewalt 18V battery compact X2 and charger (North Burnaby) $75

2012-02-08T16:57:50-08:00

I have 2 spare batteries for a Dewalt 18V tool. Model # DC9099. I've been using them for 6 months. Only charged them 10 times. I will also include the battery charger. Thanks for looking.

Location: North Burnaby
it's NOT ok to contact this poster with services or other commercial interests

POWER TOOLS (South Burnaby)

2012-02-08T16:40:37-08:00

Bosch Bulldog hammer drill $60
Brand New Circular saw $40
Used B&D Circular saw $25
1500 lb brand new 12 volt winch $35 (brand new in box)
Coates 2020 tire changer on super heavy duty dolly $300
604 441 4183 JOHNNY

Location: South Burnaby
it's NOT ok to contact this poster with services or other commercial interests

RE:POWER WASH PRICE FIRM (Are You Nuts) $1

2012-02-08T15:15:39-08:00

Are you completely delusional.

Those pieces of shit you are advertising with "FIRM" prices can be purchased "NEW" for a few hundred dollars "LESS" with better quality pumps.

Location: Are You Nuts
it's NOT ok to contact this poster with services or other commercial interests

Flat bed furniture dolly (New Westminster) $30

2012-02-08T15:02:46-08:00

Flat bed furniture dolly
Four new heavy duty casters.
Good for commercial and/or household use
778-712-7171

Location: New Westminster
it's NOT ok to contact this poster with services or other commercial interests

Black & Decker finishing sander with box (New Westminster) $10

2012-02-08T15:01:56-08:00

Black & Decker finishing sander with box
778-712-7171

Location: New Westminster
it's NOT ok to contact this poster with services or other commercial interests

HAUBOLD - 22ga.(3/8" crown)UPHOLSTERY STAPLER uses 1400 series staples (Burnaby) $95

2012-02-08T14:44:44-08:00

HAUBOLD - 22ga.(3/8" crown) UPHOLSTERY STAPLER uses 1400 series staples

-drives 22ga. 3/8" crown staples: 3/16" - 9/16" in length
-uses HAUBOLD-1400 series staples: 1404 - 1414
-bottom load magezine
-rear exhaust
-tool in excellent working condition - new rear exhaust filter & fairly new bumper & pusher spring
COSTS: $300.00 NEW

ASKING: $95.00

CALL: KEVIN @ (604) 290-4082

Location: Burnaby
it's NOT ok to contact this poster with services or other commercial interests

Loher 3 faze motor (north burnaby/sfu) $300

2012-02-08T14:29:01-08:00

Loher 3 faze motor from a band meat saw

Location: north burnaby/sfu
it's NOT ok to contact this poster with services or other commercial interests

Bosch 1375A grinder (north burnaby/sfu) $40

2012-02-08T14:28:56-08:00

Bosch 1375A grinder
good working condtion

Location: north burnaby/sfu
it's NOT ok to contact this poster with services or other commercial interests

Craftsman professsional drywall screwdriver (north burnaby/sfu) $30

2012-02-08T14:28:51-08:00

sears craftsman professional
drywall screwdriver
working condition

Location: north burnaby/sfu
it's NOT ok to contact this poster with services or other commercial interests

various automotove repair manuals (north burnaby/sfu) $5

2012-02-08T14:28:39-08:00

Isuzu Rodeo & Amigo Honda Passport 1989 thru 1997 all models repair manual
Dodge Pick-ups 1974 thru 1990 2wd and 4wd repair manual
Dodge Pick-ups 1974 thru 1993 2wd and 4wd repair manual
Dodge Dakota pick-ups 1987 thru 1996 2wd and 4wd repair manual
General Motors Buick Century, Chevrolet Celebrity, Oldsmobile Ciera, Cutlass Cruiser, Pontiac 6000
1982 thru 1996 models repair manual

$5.00 each

Location: north burnaby/sfu
it's NOT ok to contact this poster with services or other commercial interests

sears timing light (north burnaby/sfu) $45

2012-02-08T14:28:14-08:00

sears timing light 244.2115

Location: north burnaby/sfu
it's NOT ok to contact this poster with services or other commercial interests

Chicago Pheumatic air impact wrench (north burnaby/sfu) $100

2012-02-08T14:27:41-08:00

CP731 air impact wrench 1/2" air impact wrench
rated at 90PSIG 6.2 max

Location: north burnaby/sfu
it's NOT ok to contact this poster with services or other commercial interests

Air impact wrench (north burnaby/sfu) $80

2012-02-08T14:27:27-08:00

air impact wrench 1/2"

Location: north burnaby/sfu
it's NOT ok to contact this poster with services or other commercial interests

King touch up gun new (north burnaby/sfu) $40

2012-02-08T14:27:10-08:00

never used
King touch up gun
air pressure 30-50 P.S.I.
air consumption 4.0C.F.M. at 50 P.S.T.
weight gun only 0.7 lbs
gun and cup 1.2 lbs
tip of nozzle 1.8
capacity 6F cup 0.25 l.
Cat No. 1050-334

Location: north burnaby/sfu
it's NOT ok to contact this poster with services or other commercial interests

Ultra Pro 3/8" air drill (north burnaby/sfu) $100

2012-02-08T14:26:51-08:00

new condition never used with manual reversible air drill
3/8" air drill size
no. 66300

Location: north burnaby/sfu
it's NOT ok to contact this poster with services or other commercial interests

Campbell Hausfeld air ratchet (north burnaby/sfu) $25

2012-02-08T14:26:32-08:00

Campbell hausfeld 3/8" air ratchet TL1001

Location: north burnaby/sfu
it's NOT ok to contact this poster with services or other commercial interests

Black & Decker super sawcat 2695 (north burbaby/sfu) $200

2012-02-08T14:26:17-08:00

super sawcat 2695 by black and decker
8 1/4" super sawcat circular saw
120 v
made in the usa

Location: north burbaby/sfu
it's NOT ok to contact this poster with services or other commercial interests

Craftsman Pro. Cordless 18v Drill, 2 batteries and case (New Westminster) $20

2012-02-08T14:11:13-08:00

I have a Craftsman Professional 18v cordless drill-driver with 2 battery packs and plastic carry case. only one problem the battery charging cradle stopped working a few months ago. I took it to Sears to have it looked at (unfortunately my warranty expired) and apparently its an easy fix by soldering a new capacitor on its board or buying a after-market charger for about 12 bucks on ebay. I rarely use a drill and am waaaay to cheap and lazy ro repair the charger myself. so $20 o.b.o.... it also has a built-in- level ...which i used more than the drill itself. Cheers

Location: New Westminster
it's NOT ok to contact this poster with services or other commercial interests

Mk 101 tile saw, work for brick,stone (burnaby) $240

2012-02-08T12:31:18-08:00

I have for sale a used , good condition MK 101 tile saw, i was using it to cut bricks and stone since im a mason but its perfect for tiles.
come with a good 10" diamond blade and working water pump, i dont have the stand for it though.
Work on both 120 and 230 power supply, just gotta flick the switch.

bought it from a friend 500$ over a year ago, barely used it since then.

email me or txt msg me 778 928-9453 NO CALL only txt msg i will contact you after

tiling,masonry.bricks,brick,block,pavers,mason,concrete,block

Location: burnaby
it's NOT ok to contact this poster with services or other commercial interests

A long wood box (Burnaby) $20

2012-02-08T12:04:50-08:00

66" x 6" x 5"

Location: Burnaby
it's NOT ok to contact this poster with services or other commercial interests

three fiber glass made boxes (Burnaby) $10

2012-02-08T12:02:07-08:00

I have three fiber glass made boxes with handlers and straps for sale, $20 each.

(2) 31" x 21" x 7"
(1) 40" x 24" x 6"

10 dollar each

Location: Burnaby
it's NOT ok to contact this poster with services or other commercial interests

2 Stage Tower on wheels, Cage (N. Burnaby) $365

2012-02-08T11:30:08-08:00

2 Stage Tower on wheels, with Cage

8 ft high raises to double ... have used it to drywall 24 ft high walls

it has been sitting in the shop for awhile, and needs to be worked, oiled, etc.
it's simple but needs to be worked on a little.

Also can't find the crank that fits on a 5/8" square shaft for up/down
(shown in pic where pipe wrench is) need to make another one

Base - 52" x 32"
Cage - 19" x 30"

Have moved it around in a reg. full sized van
(side rails on cage fold down)

$365.00 as is

Contact Bill

email, or
cell. 604-340-9091

Location: N. Burnaby
it's NOT ok to contact this poster with services or other commercial interests

SUPCO 16ga.(1" crown) WIDE-CROWN STAPLER (5/8"- 1-1/2") (Burnaby) $100

2012-02-08T11:08:20-08:00

*SUPCO* 16ga.(1" crown) WIDE-CROWN *STAPLER* (5/8"- 1-1/2")

*IDEAL* for BUTT-JOINTS in rv manufacturing & furniture frames, used to
install stucco wire, and lumber wrap packaging, etc.

*SUPCO* model: SSW2640
-drives 16ga. 1" crown staples: 5/8" - 1-1/2" in length
-uses SENCO-P series staples: P10-P17
-lightweight
-top loading magezine
-tool-less depth-of-drive adjustment to countersink or flush drive staples
-ez-clear fron latch assembly
-comfort rubber grip
-tool in excellent worling condition
COSTS: $300.00 NEW

ASKING: $100.00

CALL: KEVIN @ (604) 290-4082

Location: Burnaby
it's NOT ok to contact this poster with services or other commercial interests

ARROW 16ga.(1" crown) Heavy-Duty HAMMER TACKERS (Burnaby) $30

2012-02-08T11:07:14-08:00

*ARROW* 16ga.(1" crown) Heavy-Duty HAMMER TACKERS

*IDEAL* for lumber wrap, asphalt shingles, metal lath, shakes,
assembling shipping crates, attaching corrugated containers to
wooden pallets and a wide variety of heavy-duty stapling
applications

*ARROW* model: HT65
-drives 16ga. 1" crown staples: 1/2"-3/4" in length
-uses ARROW-HT65 staples or SENCO-P series staples:P08-P11
-tacker in "like new" condition
COSTS: $140.00 NEW

(2) available

ASKING: $30.00 each

CALL: KEVIN @ (604) 290-4082

Location: Burnaby
it's NOT ok to contact this poster with services or other commercial interests

7.5HP compressor and dryer (Burnaby) $2000

2012-02-08T09:35:48-08:00

Compressor and Compressed air dryer for sale from wood shop. The compressor is a Devair 80Gallon 7.5hp compressor in excellent condition. The dryer is also a Devair and is also in good condition. I would like to sell these items as a bundle but if you have any questions please feel free to email or call.
Thanks
Dale
778 320 2844

Location: Burnaby
it's NOT ok to contact this poster with services or other commercial interests

craigslist | tools in burnaby/newwest

Crank shaft grinder grindix1000e (newwest bc) $12500

Commercial vacuum ( burnaby) $440

TPI DIGITAL MULTIMETER (Burnaby) $75

Two cycle generator never used (Burnaby) $90

Vibrating/shaking tables (Burnaby)

Metal bar with rollers (byrne and marine)

Delta truck box (vancouver/burnaby) $250

1 1/4 "long X 1/4" wide Plastic fasteners with metal hammer/screw ste $25

safety hat hardhat $15

ROPE all lengths..Vertical lifeline - 3-strand FALL Arrest ( Canadian approved !) $50

Drywall stilts (New Westminster) $110

2 5lb weights (New Westminster) $5

IMER Combi 250V bridge tile saw (BBY) $850

otc scanner (south burnaby) $100

hoist (south burnaby) $6000

hoist pad extenders (south burnaby) $20

Bernzomatic Solid Brass Torch Kit (New Westminster) $2

snap-on scanner (south burnaby) $1000

sissor dump lift (south burnaby) $650

pressure washer (south burnaby) $300

Makita 18v Grinder NEW tool only (New West) $80

HITACHI C12LSH CHOP SAW $380

10 NEW Stainless Steel Braided Leader Hose for COMPRESSOR w/valve (New Westminster) $50

2 bar clamp (New Westminster) $20

Portable Wet / dry Diamond Tile saw NEW $60

Snap-on Electric power washer 1750 psi $95

Brand NEW Rail Tile saw, cuts up to 26 inch tiles $275

4"-8" *FILES* "New" FLAT, SQUARE, THREE-SIDED *IDEAL for Jewelry, etc. (Burnaby) $1

10" **FILES** "New" SQUARE, THREE-SIDED - Made in ENGLAND, etc. (N. Burnaby) $1

HITACHI * NV65AH * 2-1/2" HARDI SIDING COILNAILER (4-months old) (BBy) $195

Cadillac Tool Belt and Tools (edmonds highgate) $40

HEAVY DUTY FLAT DOLLIES (South Burnaby)

Snap-On Rolling Cabinet (New West) $2000

Craftsman 22 Litre wet/dry VAC (New Westminster) $50

Milwaukee Cordless Drill (New Westminster) $80

Hand Truck by Harper (New Westminster) $30

Craftsman 8 1/2" sliding compound mitre saw (New Westminster) $150

Bishamon model x305 Automated Hydraulic Scissor Table Lift (Near SFU) $900

MODUBLAST BEAD BLASTING CABINET $500

brand new outdoor extension cord 12 feet long (New Westminster) $6

SZ335 tire chains $55

Craftsman table saw (bby) $100

FatMax Mobile Work Center - half price (N. Bby - Can deliver) $65

Pneutek Fasteners 3/4 inch 1000 per box (South Burnaby) $5

HILTI TE 805 BREAKER HAMMER (Metrotown) $950

HILTI TE 805 BREAKER HAMMER with 2 bits

Grinder Stand (Bby/New West) $45

LATHE INSERT (COQ.) $30

LATHE BACKING PLATE (COQ.) $125

MILLING MACHINE (PRO VISE STOP) (COQ.) $65

MILLING VISE 6" (VERTEX) (COQ.) $250

LATHE ( RADIUS CUTTER) (COQ.) $300

RADIUS TOOL FOR LATHE (COQ.) $250

carpenters apron (Burnaby) $15

Drywall tools (Burnaby) $20

Kreg mitre saw fence system (New West) $90

Stanley HD Electric Planer (Lougheed Mall) $100

7" rok tile saw w/laser and stand (burnaby) $60

10,000 Watts Max/7200 Watts Rated Belt-Driven Generator Head $300

NEW makita hammer drill & impact drill combo (N.Burnaby) $325

ARROW FASTENERS #T50 Staple Gun/Tacker$25 (BURNABY)

NEWWWW STEEL TOE SHOE(KODIAK),BLACK,LEATHER,SIZE 10-WAS $200 (BBY) $55

RAMSET NAIL GUN (2 UNIT) + LOTS OF NAILS/CARTRGE/ EXTRAS (BBY BRENT WOOD) $95

Brand new 6.5hp 2 stage snow thrower blower recoil and electric start (West Vancouver) $200

NSS PACER 30 commercial vacume (burnaby) $440

Commercial vacuum (burnaby) $440

HEAVY DUTY TARP BAGS (COQUITLAM) $450

6.5 lawn mower (bby)

Pressure washer Simoniz 1500psi (Burnaby) $58

DIGITAL COUNTING SCALE (BURNABY) $130

DeWalt 20V Max 1.5 AH Lithium-lon Battery (burnaby) $50

dewalt 12volt lithum batteries (burnaby) $25

Air compressor (New West Moody Park) $120

24' extension ladder "Lite" (highgate) $100

Very expensive air and water tight cargo box $50

Makita 18v Grinder NEW tool only (New West) $80

Dewalt 18V battery compact X2 and charger (North Burnaby) $75

POWER TOOLS (South Burnaby)

RE:POWER WASH PRICE FIRM (Are You Nuts) $1

4"-8" FILES "New" FLAT, SQUARE, THREE-SIDED *IDEAL for Jewelry, etc. (Burnaby) $1

10" FILES "New" SQUARE, THREE-SIDED - Made in ENGLAND, etc. (N. Burnaby) $1

SUPCO 16ga.(1" crown) WIDE-CROWN STAPLER (5/8"- 1-1/2") (Burnaby) $100

ARROW 16ga.(1" crown) Heavy-Duty HAMMER TACKERS (Burnaby) $30